Sale!

PS Hardened Steel Nozzle (0.40)

565

5 in stock (can be backordered)

Description

7.8
Hardness (Mohs)
450℃

Maximum Printing Temperature
22W/m·k

Thermal Conductivity
8μm/m·℃

Expansion Coefficient

 

Available Models
RepRap M6 | 175/300:0.25mm/0.4mm/0.6mm/0.8mm

RepRap M6 Plus | 175/300:0.25mm/0.4mm/0.6mm/0.8mm

Performance Analysis
Hardness over HRC60 makes an minimum wear at the hole size after a long time printing with abrasive materials.
Temperature resistance up to 450℃, easily handling with special engineering plastics such as PEEK.
Special processing technology and post-treatment make the nozzle without burr at the edge of tip and without debris in the hole.
Inner hole roughness lower than Ra0.4; Higher smoothness and less adhesion.
Min. orifice diameter 0.1mm/±0.01mm in experimental level application, making sure high accuracy printing.
High quality imported die steel material ensures the stability of performance.

Applicable Scenario

Wear-resistance, High temperature performance, suitable for 3D printing composites with abrasive additives such as Carbon Fiber, Steel, Wood, Boron Carbide, Tungsten and Phosphorescent pigment as well as conventional materials.

 

Product
Precision

Min. Orifice Diameter
φ0.10

Tolerance
±0.01mm

Inner Hole Roughness
≤Ra0.4μm

Concentricity
≤0.02mm